How to Start a Moped - 56juqingba: How-to instructions you can trust

Spread the love

Download Article
Explore this Article methods
1 Starting an Electric Moped
2 Turning on a Vintage Moped
3 Kickstarting a Moped
4 Moving a Nonstarter
+ Show 1 more…
– Show less… Other Sections
Questions & Answers
Video
Tips and Warnings
Related Articles
References
Co-authored by wikiHow Staff

Last Updated: July 2, 2024

Download Article X

This article was co-authored by wikiHow Staff. Our trained team of editors and researchers validate articles for accuracy and comprehensiveness. wikiHow’s Content Management Team carefully monitors the work from our editorial staff to ensure that each article is backed by trusted research and meets our high quality standards.

This article has been viewed 100,699 times.

Learn more…

Mopeds are fun, environmentally-friendly ways to get around. They are motorized bicycles, having an engine but also telltale bike pedals. Still, they can be tricky to start, especially if yours is vintage or has been idle for a while. To start your moped, flip on the kill switch, squeeze the brakes, then hit the start button for a conventional start or peddle first for a moving start.

Table of Contents

Steps

Method
1 Method 1 of 4:

Starting an Electric Moped

Download Article

1 Turn the key. Put the key in the ignition. Turn it to the right until it clicks in place, signifying that the ignition has been engaged.
2 Flip the kill switch to the on position. Since mopeds generate automatic movement, they have a kill switch to shut them down quickly. The kill switch is a colored switch near the handlebars. Find it and flip it to the on position, which is often represented as an open circle. ^{[1] X Research source} Advertisement
3 Squeeze the brake levers. The brake levers are on the moped’s handlebars. The back brake is necessary to engage and is activated by the left lever. However, it’s easier to hold both until you are ready to drive. ^{[2] X Research source}
- The moped will move automatically when you start it, so if you don’t have the back brake engaged, you’ll pitch forward.
4 Press the start button. Continue holding the levers. Use your thumb to hit the start button. This will often be a red button near the right handlebar. Once you hear the motor start, you are free to release the brakes and drive.

Method
2 Method 2 of 4:

Turning on a Vintage Moped

Download Article

1 Put the key in the lock. Vintage brands such as Puch have more complicated starting processes. First, if the lock has been engaged, start unlocking the moped using the keylock right below the handlebars. Move the handlebar to the right. Put the key inside the lock.
- Be aware that different brands may require more or less steps to start.
2 Turn the key. First, turn the key to the right. When it is turned to the right, you should be able to push it in. Once you do that, turn the key back to the left until the moped is unlocked.
3 Turn on the fuel valve. On a Puch Maxi, for example, you’ll find the fuel valve on the right side of the moped’s frame. This is a switch you must turn off when you park the moped. You may see the “on” and “off” labels on your moped. Pull the lever into the “on” position.
4 Flip the engine switch. Look near the handlebars for the engine switch. On the Puch Maxi, it’s on the right side. Make sure the switch is flipped to the “run” position.
5 Depress the choke. This only needs to be done if the engine is cold from disuse. Locate the carburetor. It’ll have a small black bar poking out of it. This is the choke, which you need to press and hold. While you do this, look downwards and find the small primer button on the carburetor. Press this too.
6 Pull the starting lever. Hold the front brake, which is on the right side of the handlebars, so you keep the moped under control. Find the starting lever under the left handlebar. Keep the pedals level as you pull it. ^{[3] X Research source}
7 Push the pedal. Continue holding the starting lever as you begin to pedal. The engine should start and you should be free to go. If it doesn’t start, you may need to try pedal-starting it.

Method
3 Method 3 of 4:

Kickstarting a Moped

Download Article

1 Place the key in the ignition. Pedal starting is useful for starting a struggling engine and moving from a stop. Get the key in place. Turn it to the right until it clicks to show that the ignition has been engaged. Do this before you start pedaling so you don’t have to fumble with the key.
2 Pedal forward. Work the pedals like you would a bicycle. Release the kickstand and push forward to get a little momentum. Pedaling will be a little difficult because of the weight of the moped, but keep going until the starting process is complete.
3 Press the start button. Find the start button on your moped. It may be a red button near the right handlebar or a lever on the left handlebar. Some vehicles may also have a kickstart lever on one of the wheels that you can hit with your foot instead. Use this to start the motor.
- Since you’re already moving, don’t hit the brakes.
4 Open the throttle. Locate the throttle. It is likely on the right handlebar. Lay your palm flat on the throttle, then gently turn it towards you. This opens the throttle as you move, allowing more air to enter the engine. Continue to twist the throttle to accelerate. ^{[4] X Research source}
5 Release the start lever. With the motor started, the moped should be moving without you having to pedal. Adjust your body as the force of movement pulls you back. Stay straight with your eyes on the road as you let go of the starting lever or button if you haven’t yet.

Method
4 Method 4 of 4:

Moving a Nonstarter

Download Article

1 Remove the spark plug. To check the ignition spark, find the plug on the engine. Make sure the kill switch near the moped’s handlebars is off before you do this. Try to start the moped. If the engine works, you should see a spark inside of it. Your finger would pop off if you held it over the hole. ^{[5] X Research source}
- If the spark plug looks dirty, try a new one.
- If the engine won’t start at all, you may need a new battery.
2 Check the gas. Open the fuel tank. If the gas has been sitting in there for at least a month, water will gather at the bottom of the tank. Unscrew the drain screw on the carburetor or undo the hose so that the water comes out. Catch any gas in a container.
- Use compressed air to blow debris out of the carburetor.
3 Try the choke. If you’re sure there’s a spark, gas infusion, and air moving through the moped, try pressing the choke. It’s the small black rod sticking out of the carburetor. Press it and try to start the engine. If it sounds like it is trying to start, open the throttle, which may be operated by turning the right handlebar towards you. Try starting the engine a few times while doing this. ^{[6] X Research source}

Community Q&A

Search
Add New Question

Question Will a blown headlight prevent a moped from starting? Community Answer No, it won’t. Thanks! We’re glad this was helpful.
Thank you for your feedback.
If wikiHow has helped you, please consider a small contribution to support us in helping more readers like you. We’re committed to providing the world with free how-to resources, and even $1 helps us in our mission. Support wikiHow Yes No Not Helpful 0 Helpful 0

Ask a Question 200 characters left Include your email address to get a message when this question is answered.
Submit

Video

Tips

Submit a Tip All tip submissions are carefully reviewed before being published Name Please provide your name and last initial
Submit Thanks for submitting a tip for review!

Warnings

Wear safety gear, including a helmet, to protect yourself in case of an accident. Thanks Helpful 0 Not Helpful 0